Nieuwkoop – Office – 750sqft Wallheating SpeeTile10

Projectinformation

These beautiful reference photos were taken at a client’s location in Nieuwkoop, where they installed 70m² of wall heating in their commercial building. The client was already familiar with underfloor heating/cooling, as they had previously used WARP Systems in their home. Following advice from an installation agency, they chose to apply wall heating in their commercial property.

The commercial building, with a total area of 100m², will be used for office and storage purposes. A total of 70m² of SpeeTile10 wall heating was installed in the office on the first floor. The office floor was installed later, so the client opted for wall heating as the primary heating source. The wall heating is connected to a Vaillant heat pump with a capacity of 3kW. To install the heat pump, 110 meters were drilled into the ground. The advantage of low-temperature wall heating combined with a heat pump is that it can also cool in the summer.

This client is already very satisfied with their underfloor heating/cooling at home and is eager to see the results of the wall heating in their new office.